lvm-fullreport(8) — Linux manual page

NAME | SYNOPSIS | DESCRIPTION | USAGE | OPTIONS | VARIABLES | ENVIRONMENT VARIABLES | SEE ALSO | COLOPHON

LVM(FULLREPORT)               Red Hat, Inc.              LVM(FULLREPORT)

NAME         top

       lvm fullreport — Display full report

SYNOPSIS         top

       lvm fullreport
           [ option_args ]
           [ position_args ]

DESCRIPTION         top

       lvm fullreport produces formatted output about PVs, PV segments,
       VGs, LVs and LV segments. The information is all gathered
       together for each VG (under a per-VG lock) so it is consistent.
       Information gathered from separate calls to vgs, pvs, and lvs can
       be inconsistent if information changes between commands.

USAGE         top

       lvm fullreport
           [ -a|--all ]
           [ -o|--options String ]
           [ -S|--select String ]
           [ -O|--sort String ]
           [    --aligned ]
           [    --binary ]
           [    --configreport log|vg|lv|pv|pvseg|seg ]
           [    --foreign ]
           [    --ignorelockingfailure ]
           [    --logonly ]
           [    --nameprefixes ]
           [    --noheadings ]
           [    --nosuffix ]
           [    --readonly ]
           [    --reportformat basic|json ]
           [    --rows ]
           [    --separator String ]
           [    --shared ]
           [    --unbuffered ]
           [    --units [Number]r|R|h|H|b|B|s|S|k|K|m|M|g|G|t|T|p|P|e|E
           ]
           [    --unquoted ]
           [ COMMON_OPTIONS ]
           [ VG ... ]

       Common options for lvm:
           [ -d|--debug ]
           [ -h|--help ]
           [ -q|--quiet ]
           [ -t|--test ]
           [ -v|--verbose ]
           [ -y|--yes ]
           [    --commandprofile String ]
           [    --config String ]
           [    --devices PV ]
           [    --devicesfile String ]
           [    --driverloaded y|n ]
           [    --journal String ]
           [    --lockopt String ]
           [    --longhelp ]
           [    --nohints ]
           [    --nolocking ]
           [    --profile String ]
           [    --version ]

OPTIONS         top


       --aligned
              Use with --separator to align the output columns

       -a|--all

       --binary
              Use binary values "0" or "1" instead of descriptive liter‐
              al  values  for columns that have exactly two valid values
              to report (not counting the "unknown" value which  denotes
              that the value could not be determined).

       --commandprofile String
              The command profile to use for command configuration.  See
              lvm.conf(5) for more information about profiles.

       --config String
              Config   settings   for   the   command.   These  override
              lvm.conf(5) settings.  The String arg uses the same format
              as lvm.conf(5), or  may  use  section/field  syntax.   See
              lvm.conf(5) for more information about config.

       --configreport log|vg|lv|pv|pvseg|seg
              See lvmreport(7).

       -d|--debug ...
              Set  debug level. Repeat from 1 to 6 times to increase the
              detail of messages sent to the log file and/or syslog  (if
              configured).

       --devices PV
              Devices  that  the command can use. This option can be re‐
              peated or accepts a comma separated list of devices.  This
              overrides the devices file.

       --devicesfile String
              A file listing devices that LVM should use.  The file must
              exist   in  /etc/lvm/devices/  and  is  managed  with  the
              lvmdevices(8) command.  This overrides the lvm.conf(5) de‐
              vices/devicesfile and devices/use_devicesfile settings.

       --driverloaded y|n
              If set to no, the command will not attempt to use  device-
              mapper.  For testing and debugging.

       --foreign
              Report/display   foreign   VGs  that  would  otherwise  be
              skipped.  See lvmsystemid(7) for  more  information  about
              foreign VGs.

       -h|--help
              Display help text.

       --ignorelockingfailure
              Allows a command to continue with read-only metadata oper‐
              ations after locking failures.

       --journal String
              Record  information in the systemd journal.  This informa‐
              tion is in addition to information enabled by the lvm.conf
              log/journal setting.  command:  record  information  about
              the  command.   output: record the default command output.
              debug: record full command debugging.

       --lockopt String
              Used to pass options for special cases to  lvmlockd.   See
              lvmlockd(8) for more information.

       --logonly
              Suppress command report and display only log report.

       --longhelp
              Display long help text.

       --nameprefixes
              Add  an  "LVM2_" prefix plus the field name to the output.
              Useful with --noheadings to produce a list of  field=value
              pairs  that  can be used to set environment variables (for
              example, in udev rules).

       --noheadings
              Suppress the headings line that is normally the first line
              of output.  Useful if grepping the output.

       --nohints
              Do not use the hints file to locate  devices  for  PVs.  A
              command  may  read more devices to find PVs when hints are
              not used. The command will  still  perform  standard  hint
              file invalidation where appropriate.

       --nolocking
              Disable locking.

       --nosuffix
              Suppress the suffix on output sizes. Use with --units (ex‐
              cept h and H) if processing the output.

       -o|--options String
              Comma-separated,  ordered  list  of  fields  to display in
              columns.  String arg syntax is: [+|-|#]Field1[,Field2 ...]
              The prefix + will append the specified fields to  the  de‐
              fault  fields, - will remove the specified fields from the
              default fields, and # will compact specified  fields  (re‐
              moving them when empty for all rows.)  Use -o help to view
              the  list  of all available fields.  Use separate lists of
              fields to add, remove or compact by repeating the  -o  op‐
              tion:  -o+field1,field2 -o-field3,field4 -o#field5.  These
              lists are evaluated from left to right.   Use  field  name
              lv_all to view all LV fields, vg_all all VG fields, pv_all
              all  PV  fields,  pvseg_all all PV segment fields, seg_all
              all LV  segment  fields,  and  pvseg_all  all  PV  segment
              columns.  See the lvm.conf(5) report section for more con‐
              fig  options.  See lvmreport(7) for more information about
              reporting.

       --profile String
              An alias for --commandprofile  or  --metadataprofile,  de‐
              pending on the command.

       -q|--quiet ...
              Suppress  output  and  log messages. Overrides --debug and
              --verbose.  Repeat once to also suppress any prompts  with
              answer 'no'.

       --readonly
              Run  the  command  in  a special read-only mode which will
              read on-disk metadata without needing to take  any  locks.
              This can be used to peek inside metadata used by a virtual
              machine image while the virtual machine is running. No at‐
              tempt  will  be made to communicate with the device-mapper
              kernel driver, so this option is unable to report  whether
              or not LVs are actually in use.

       --reportformat basic|json
              Overrides  current  output format for reports which is de‐
              fined globally  by  the  report/output_format  setting  in
              lvm.conf(5).   basic  is  the original format with columns
              and rows.  If there is more than one report  per  command,
              each report is prefixed with the report name for identifi‐
              cation.  json  produces  report output in JSON format. See
              lvmreport(7) for more information.

       --rows
              Output columns as rows.

       -S|--select String
              Select objects for processing and reporting based on spec‐
              ified criteria.  The criteria syntax is described by --se‐
              lect help and lvmreport(7).  For reporting  commands,  one
              row  is  displayed  for each object matching the criteria.
              See --options help for selectable object fields.  Rows can
              be displayed with an additional "selected" field  (-o  se‐
              lected)  showing  1 if the row matches the selection and 0
              otherwise.  For non-reporting commands which  process  LVM
              entities,  the  selection  is  used  to  choose  items  to
              process.

       --separator String
              String to use to separate each column. Useful if  grepping
              the output.

       --shared
              Report/display  shared VGs that would otherwise be skipped
              when  lvmlockd  is  not  being  used  on  the  host.   See
              lvmlockd(8) for more information about shared VGs.

       -O|--sort String
              Comma-separated  ordered  list  of columns to sort by. Re‐
              places the default selection. Precede any  column  with  -
              for a reverse sort on that column.

       -t|--test
              Run in test mode. Commands will not update metadata.  This
              is  implemented by disabling all metadata writing but nev‐
              ertheless returning success to the calling function.  This
              may  lead  to unusual error messages in multi-stage opera‐
              tions if a tool relies on reading  back  metadata  it  be‐
              lieves has changed but hasn't.

       --unbuffered
              Produce output immediately without sorting or aligning the
              columns properly.

       --units [Number]r|R|h|H|b|B|s|S|k|K|m|M|g|G|t|T|p|P|e|E
              All sizes are output in these units: human-(r)eadable with
              '<'  rounding indicator, (h)uman-readable, (b)ytes, (s)ec‐
              tors, (k)ilobytes, (m)egabytes, (g)igabytes,  (t)erabytes,
              (p)etabytes,  (e)xabytes.   Capitalise to use multiples of
              1000 (S.I.) instead of 1024.  Custom units can  be  speci‐
              fied, e.g. --units 3M.

       --unquoted
              When  used  with  --nameprefixes,  output  values  in  the
              field=value pairs are not quoted.

       -v|--verbose ...
              Set verbose level. Repeat from 1 to 4  times  to  increase
              the detail of messages sent to stdout and stderr.

       --version
              Display version information.

       -y|--yes
              Do  not  prompt  for confirmation interactively but always
              assume the answer yes. Use with extreme caution.  (For au‐
              tomatic no, see -qq.)

VARIABLES         top

       VG     Volume Group name.  See lvm(8) for valid names.

       String See the option description for information about the
              string content.

       Size[UNIT]
              Size is an input number that accepts an optional unit.
              Input units are always treated as base two values, regard‐
              less of capitalization, e.g. 'k' and 'K' both refer to
              1024.  The default input unit is specified by letter, fol‐
              lowed by |UNIT.  UNIT represents other possible input
              units: b|B is bytes, s|S is sectors of 512 bytes, k|K is
              KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E
              is EiB.  (This should not be confused with the output con‐
              trol --units, where capital letters mean multiple of
              1000.)

ENVIRONMENT VARIABLES         top

       See lvm(8) for information about environment variables used by
       lvm.  For example, LVM_VG_NAME can generally be substituted for a
       required VG parameter.

SEE ALSO         top

       lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),

       pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8),
       pvremove(8), pvresize(8), pvs(8), pvscan(8),

       vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8),
       vgcreate(8), vgconvert(8), vgdisplay(8), vgexport(8),
       vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8),
       vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8),
       vgs(8), vgscan(8), vgsplit(8),

       lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8),
       lvextend(8), lvreduce(8), lvremove(8), lvrename(8), lvresize(8),
       lvs(8), lvscan(8),

       lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),

       dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8),
       cmirrord(8), lvmdbusd(8), fsadm(8),

       lvmsystemid(7), lvmreport(7), lvmcache(7), lvmraid(7),
       lvmthin(7), lvmvdo(7), lvmautoactivation(7)

COLOPHON         top

       This page is part of the lvm2 (Logical Volume Manager 2) project.
       Information about the project can be found at 
       ⟨http://www.sourceware.org/lvm2/⟩.  If you have a bug report for
       this manual page, see ⟨https://github.com/lvmteam/lvm2/issues⟩.
       This page was obtained from the project's upstream Git repository
       ⟨git://sourceware.org/git/lvm2.git⟩ on 2024-06-14.  (At that
       time, the date of the most recent commit that was found in the
       repository was 2024-06-11.)  If you discover any rendering
       problems in this HTML version of the page, or you believe there
       is a better or more up-to-date source for the page, or you have
       corrections or improvements to the information in this COLOPHON
       (which is not part of the original manual page), send a mail to
       man-pages@man7.org

LVM TOOLS 2.03.25(2)-git (2024-0... 8                    LVM(FULLREPORT)

Pages that refer to this page: lvchange(8)lvconvert(8)lvcreate(8)lvdisplay(8)lvextend(8)lvm(8)lvmconfig(8)lvmdevices(8)lvmdiskscan(8)lvm-fullreport(8)lvm-lvpoll(8)lvreduce(8)lvremove(8)lvrename(8)lvresize(8)lvs(8)lvscan(8)pvchange(8)pvck(8)pvcreate(8)pvdisplay(8)pvmove(8)pvremove(8)pvresize(8)pvs(8)pvscan(8)vgcfgbackup(8)vgcfgrestore(8)vgchange(8)vgck(8)vgconvert(8)vgcreate(8)vgdisplay(8)vgexport(8)vgextend(8)vgimport(8)vgimportclone(8)vgimportdevices(8)vgmerge(8)vgmknodes(8)vgreduce(8)vgremove(8)vgrename(8)vgs(8)vgscan(8)vgsplit(8)