path_resolution(7) — Linux manual page

NAME | DESCRIPTION | SEE ALSO | COLOPHON

path_resolution(7)  Miscellaneous Information Manual  path_resolution(7)

NAME         top

       path_resolution - how a pathname is resolved to a file

DESCRIPTION         top

       Some UNIX/Linux system calls have as parameter one or more
       filenames.  A filename (or pathname) is resolved as follows.

   Step 1: start of the resolution process
       If the pathname starts with the '/' character, the starting
       lookup directory is the root directory of the calling process.  A
       process inherits its root directory from its parent.  Usually
       this will be the root directory of the file hierarchy.  A process
       may get a different root directory by use of the chroot(2) system
       call, or may temporarily use a different root directory by using
       openat2(2) with the RESOLVE_IN_ROOT flag set.

       A process may get an entirely private mount namespace in case it—
       or one of its ancestors—was started by an invocation of the
       clone(2) system call that had the CLONE_NEWNS flag set.  This
       handles the '/' part of the pathname.

       If the pathname does not start with the '/' character, the
       starting lookup directory of the resolution process is the
       current working directory of the process — or in the case of
       openat(2)-style system calls, the dfd argument (or the current
       working directory if AT_FDCWD is passed as the dfd argument).
       The current working directory is inherited from the parent, and
       can be changed by use of the chdir(2) system call.

       Pathnames starting with a '/' character are called absolute
       pathnames.  Pathnames not starting with a '/' are called relative
       pathnames.

   Step 2: walk along the path
       Set the current lookup directory to the starting lookup
       directory.  Now, for each nonfinal component of the pathname,
       where a component is a substring delimited by '/' characters,
       this component is looked up in the current lookup directory.

       If the process does not have search permission on the current
       lookup directory, an EACCES error is returned ("Permission
       denied").

       If the component is not found, an ENOENT error is returned ("No
       such file or directory").

       If the component is found, but is neither a directory nor a
       symbolic link, an ENOTDIR error is returned ("Not a directory").

       If the component is found and is a directory, we set the current
       lookup directory to that directory, and go to the next component.

       If the component is found and is a symbolic link, we first
       resolve this symbolic link (with the current lookup directory as
       starting lookup directory).  Upon error, that error is returned.
       If the result is not a directory, an ENOTDIR error is returned.
       If the resolution of the symbolic link is successful and returns
       a directory, we set the current lookup directory to that
       directory, and go to the next component.  Note that the
       resolution process here can involve recursion if the prefix
       ('dirname') component of a pathname contains a filename that is a
       symbolic link that resolves to a directory (where the prefix
       component of that directory may contain a symbolic link, and so
       on).  In order to protect the kernel against stack overflow, and
       also to protect against denial of service, there are limits on
       the maximum recursion depth, and on the maximum number of
       symbolic links followed.  An ELOOP error is returned when the
       maximum is exceeded ("Too many levels of symbolic links").

       As currently implemented on Linux, the maximum number of symbolic
       links that will be followed while resolving a pathname is 40.
       Before Linux 2.6.18, the limit on the recursion depth was 5.
       Starting with Linux 2.6.18, this limit was raised to 8.  In Linux
       4.2, the kernel's pathname-resolution code was reworked to
       eliminate the use of recursion, so that the only limit that
       remains is the maximum of 40 resolutions for the entire pathname.

       The resolution of symbolic links during this stage can be blocked
       by using openat2(2), with the RESOLVE_NO_SYMLINKS flag set.

   Step 3: find the final entry
       The lookup of the final component of the pathname goes just like
       that of all other components, as described in the previous step,
       with two differences: (i) the final component need not be a
       directory (at least as far as the path resolution process is
       concerned—it may have to be a directory, or a nondirectory,
       because of the requirements of the specific system call), and
       (ii) it is not necessarily an error if the component is not
       found—maybe we are just creating it.  The details on the
       treatment of the final entry are described in the manual pages of
       the specific system calls.

   . and ..
       By convention, every directory has the entries "." and "..",
       which refer to the directory itself and to its parent directory,
       respectively.

       The path resolution process will assume that these entries have
       their conventional meanings, regardless of whether they are
       actually present in the physical filesystem.

       One cannot walk up past the root: "/.." is the same as "/".

   Mount points
       After a mount dev path command, the pathname "path" refers to the
       root of the filesystem hierarchy on the device "dev", and no
       longer to whatever it referred to earlier.

       One can walk out of a mounted filesystem: "path/.." refers to the
       parent directory of "path", outside of the filesystem hierarchy
       on "dev".

       Traversal of mount points can be blocked by using openat2(2),
       with the RESOLVE_NO_XDEV flag set (though note that this also
       restricts bind mount traversal).

   Trailing slashes
       If a pathname ends in a '/', that forces resolution of the
       preceding component as in Step 2: the component preceding the
       slash either exists and resolves to a directory or it names a
       directory that is to be created immediately after the pathname is
       resolved.  Otherwise, a trailing '/' is ignored.

   Final symbolic link
       If the last component of a pathname is a symbolic link, then it
       depends on the system call whether the file referred to will be
       the symbolic link or the result of path resolution on its
       contents.  For example, the system call lstat(2) will operate on
       the symbolic link, while stat(2) operates on the file pointed to
       by the symbolic link.

   Length limit
       There is a maximum length for pathnames.  If the pathname (or
       some intermediate pathname obtained while resolving symbolic
       links) is too long, an ENAMETOOLONG error is returned ("Filename
       too long").

   Empty pathname
       In the original UNIX, the empty pathname referred to the current
       directory.  Nowadays POSIX decrees that an empty pathname must
       not be resolved successfully.  Linux returns ENOENT in this case.

   Permissions
       The permission bits of a file consist of three groups of three
       bits; see chmod(1) and stat(2).  The first group of three is used
       when the effective user ID of the calling process equals the
       owner ID of the file.  The second group of three is used when the
       group ID of the file either equals the effective group ID of the
       calling process, or is one of the supplementary group IDs of the
       calling process (as set by setgroups(2)).  When neither holds,
       the third group is used.

       Of the three bits used, the first bit determines read permission,
       the second write permission, and the last execute permission in
       case of ordinary files, or search permission in case of
       directories.

       Linux uses the fsuid instead of the effective user ID in
       permission checks.  Ordinarily the fsuid will equal the effective
       user ID, but the fsuid can be changed by the system call
       setfsuid(2).

       (Here "fsuid" stands for something like "filesystem user ID".
       The concept was required for the implementation of a user space
       NFS server at a time when processes could send a signal to a
       process with the same effective user ID.  It is obsolete now.
       Nobody should use setfsuid(2).)

       Similarly, Linux uses the fsgid ("filesystem group ID") instead
       of the effective group ID.  See setfsgid(2).

   Bypassing permission checks: superuser and capabilities
       On a traditional UNIX system, the superuser (root, user ID 0) is
       all-powerful, and bypasses all permissions restrictions when
       accessing files.

       On Linux, superuser privileges are divided into capabilities (see
       capabilities(7)).  Two capabilities are relevant for file
       permissions checks: CAP_DAC_OVERRIDE and CAP_DAC_READ_SEARCH.  (A
       process has these capabilities if its fsuid is 0.)

       The CAP_DAC_OVERRIDE capability overrides all permission
       checking, but grants execute permission only when at least one of
       the file's three execute permission bits is set.

       The CAP_DAC_READ_SEARCH capability grants read and search
       permission on directories, and read permission on ordinary files.

SEE ALSO         top

       readlink(2), capabilities(7), credentials(7), symlink(7)

COLOPHON         top

       This page is part of the man-pages (Linux kernel and C library
       user-space interface documentation) project.  Information about
       the project can be found at 
       ⟨https://www.kernel.org/doc/man-pages/⟩.  If you have a bug report
       for this manual page, see
       ⟨https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/tree/CONTRIBUTING⟩.
       This page was obtained from the tarball man-pages-6.9.1.tar.gz
       fetched from
       ⟨https://mirrors.edge.kernel.org/pub/linux/docs/man-pages/⟩ on
       2024-06-26.  If you discover any rendering problems in this HTML
       version of the page, or you believe there is a better or more up-
       to-date source for the page, or you have corrections or
       improvements to the information in this COLOPHON (which is not
       part of the original manual page), send a mail to
       man-pages@man7.org

Linux man-pages 6.9.1          2024-05-02             path_resolution(7)

Pages that refer to this page: access(2)acct(2)bind(2)chdir(2)chmod(2)chown(2)chroot(2)connect(2)execve(2)futimesat(2)intro(2)link(2)mkdir(2)mknod(2)mount(2)open(2)openat2(2)open_how(2type)readlink(2)rename(2)rmdir(2)send(2)stat(2)statfs(2)statx(2)symlink(2)truncate(2)umount(2)unlink(2)uselib(2)utime(2)utimensat(2)euidaccess(3)intro(3)statvfs(3)systemd.exec(5)credentials(7)symlink(7)