selinux_restorecon(3) — Linux manual page

NAME | SYNOPSIS | DESCRIPTION | RETURN VALUE | NOTES | SEE ALSO | COLOPHON

selinux_restorecon(3)   SELinux API documentation  selinux_restorecon(3)

NAME         top

       selinux_restorecon - restore file(s) default SELinux security
       contexts

SYNOPSIS         top

       #include <selinux/restorecon.h>

       int selinux_restorecon(const char *pathname,
                              unsigned int restorecon_flags);

       int selinux_restorecon_parallel(const char *pathname,
                                       unsigned int restorecon_flags,
                                       size_t nthreads);

DESCRIPTION         top

       selinux_restorecon() restores file default security contexts on
       filesystems that support extended attributes (see xattr(7)),
       based on:

              pathname containing a directory or file to be relabeled.
              If this is a directory and the restorecon_flags
              SELINUX_RESTORECON_RECURSE has been set (for descending
              through directories), then selinux_restorecon() will write
              an SHA1 digest of specfile entries calculated by
              selabel_get_digests_all_partial_matches(3) to an extended
              attribute of security.sehash once the relabeling has been
              completed successfully (see the NOTES section for
              details).
              These digests will be checked should selinux_restorecon()
              be rerun with the restorecon_flags
              SELINUX_RESTORECON_RECURSE flag set. If any of the
              specfile entries had been updated, the digest will also be
              updated. However if the digest is the same, no relabeling
              checks will take place.
              The restorecon_flags that can be used to manage the usage
              of the SHA1 digest are:
                     SELINUX_RESTORECON_SKIP_DIGEST
                     SELINUX_RESTORECON_IGNORE_DIGEST

              restorecon_flags contains the labeling option/rules as
              follows:

                     SELINUX_RESTORECON_SKIP_DIGEST Do not check or
                     update any extended attribute security.sehash
                     entries.

                     SELINUX_RESTORECON_IGNORE_DIGEST force the checking
                     of labels even if the stored SHA1 digest matches
                     the specfile entries SHA1 digest. The specfile
                     entries digest will be written to the
                     security.sehash extended attribute once relabeling
                     has been completed successfully provided the
                     SELINUX_RESTORECON_NOCHANGE flag has not been set,
                     and no errors have been skipped during the file
                     tree walk due to the
                     SELINUX_RESTORECON_COUNT_ERRORS flag.

                     SELINUX_RESTORECON_NOCHANGE don't change any file
                     labels (passive check) or update the digest in the
                     security.sehash extended attribute.

                     SELINUX_RESTORECON_SET_SPECFILE_CTX If set, reset
                     the files label to match the default specfile
                     context.  If not set only reset the files "type"
                     component of the context to match the default
                     specfile context.

                     SELINUX_RESTORECON_RECURSE change file and
                     directory labels recursively (descend directories)
                     and if successful write an SHA1 digest of the
                     specfile entries to an extended attribute as
                     described in the NOTES section.

                     SELINUX_RESTORECON_VERBOSE log file label changes.
                            Note that if SELINUX_RESTORECON_VERBOSE and
                            SELINUX_RESTORECON_PROGRESS flags are set,
                            then SELINUX_RESTORECON_PROGRESS will take
                            precedence.

                     SELINUX_RESTORECON_PROGRESS show progress by
                     outputting the number of files in 1k blocks
                     processed to stdout. If the
                     SELINUX_RESTORECON_MASS_RELABEL flag is also set
                     then the approximate percentage complete will be
                     shown.

                     SELINUX_RESTORECON_MASS_RELABEL generally set when
                     relabeling the entire OS, that will then show the
                     approximate percentage complete. The
                     SELINUX_RESTORECON_PROGRESS flag must also be set.

                     SELINUX_RESTORECON_REALPATH convert passed-in
                     pathname to the canonical pathname using
                     realpath(3).

                     SELINUX_RESTORECON_XDEV prevent descending into
                     directories that have a different device number
                     than the pathname entry from which the descent
                     began.

                     SELINUX_RESTORECON_ADD_ASSOC attempt to add an
                     association between an inode and a specification.
                     If there is already an association for the inode
                     and it conflicts with the specification, then use
                     the last matching specification.

                     SELINUX_RESTORECON_ABORT_ON_ERROR abort on errors
                     during the file tree walk.

                     SELINUX_RESTORECON_SYSLOG_CHANGES log any label
                     changes to syslog(3).

                     SELINUX_RESTORECON_LOG_MATCHES log what specfile
                     context matched each file.

                     SELINUX_RESTORECON_IGNORE_NOENTRY ignore files that
                     do not exist.

                     SELINUX_RESTORECON_IGNORE_MOUNTS do not read
                     /proc/mounts to obtain a list of non-seclabel
                     mounts to be excluded from relabeling checks.
                     Setting SELINUX_RESTORECON_IGNORE_MOUNTS is useful
                     where there is a non-seclabel fs mounted with a
                     seclabel fs mounted on a directory below this.

                     SELINUX_RESTORECON_CONFLICT_ERROR to treat
                     conflicting specifications, such as where two
                     hardlinks for the same inode have different
                     contexts, as errors.

                     SELINUX_RESTORECON_COUNT_ERRORS Count, but
                     otherwise ignore, errors during the file tree walk.
                     Only makes a difference if the
                     SELINUX_RESTORECON_ABORT_ON_ERROR flag is clear.
                     Call selinux_restorecon_get_skipped_errors(3) for
                     fetching the ignored (skipped) error count after
                     selinux_restorecon(3) or
                     selinux_restorecon_parallel(3) completes with
                     success. In case any errors were skipped during the
                     file tree walk, the specfile entries SHA1 digest
                     will not have been written to the security.sehash
                     extended attribute.

              The behavior regarding the checking and updating of the
              SHA1 digest described above is the default behavior. It is
              possible to change this by first calling selabel_open(3)
              and not enabling the SELABEL_OPT_DIGEST option, then
              calling selinux_restorecon_set_sehandle(3) to set the
              handle to be used by selinux_restorecon(3).

              If the pathname is a directory path, then it is possible
              to set directories to be excluded from the path by calling
              selinux_restorecon_set_exclude_list(3) with a NULL
              terminated list before calling selinux_restorecon(3).

              By default selinux_restorecon(3) reads /proc/mounts to
              obtain a list of non-seclabel mounts to be excluded from
              relabeling checks unless the
              SELINUX_RESTORECON_IGNORE_MOUNTS flag has been set.

       selinux_restorecon_parallel() is similar to
       selinux_restorecon(3), but accepts another parameter that allows
       to run relabeling over multiple threads:

              nthreads specifies the number of threads to use during
              relabeling. When set to 1, the behavior is the same as
              calling selinux_restorecon(3).  When set to 0, the
              function will try to use as many threads as there are
              online CPU cores. When set to any other number, the
              function will try to use the given number of threads.

              Note that to use the parallel relabeling capability, the
              calling process must be linked with the libpthread library
              (either at compile time or dynamically at run time).
              Otherwise the function will print a warning and fall back
              to the single threaded mode.

RETURN VALUE         top

       On success, zero is returned.  On error, -1 is returned and errno
       is set appropriately.

NOTES         top

       1.  To improve performance when relabeling file systems
           recursively (e.g. the restorecon_flags
           SELINUX_RESTORECON_RECURSE flag is set) selinux_restorecon()
           will write a calculated SHA1 digest of the specfile entries
           returned by selabel_get_digests_all_partial_matches(3) to an
           extended attribute named security.sehash for each directory
           in the pathname path.

       2.  To check the extended attribute entry use getfattr(1), for
           example:

                  getfattr -e hex -n security.sehash /

       3.  Should any of the specfile entries have changed, then when
           selinux_restorecon() is run again with the
           SELINUX_RESTORECON_RECURSE flag set, new SHA1 digests will be
           calculated and all files automatically relabeled depending on
           the settings of the SELINUX_RESTORECON_SET_SPECFILE_CTX flag
           (provided SELINUX_RESTORECON_NOCHANGE is not set).

       4.  /sys and in-memory filesystems do not support the
           security.sehash extended attribute and are automatically
           excluded from any relabeling checks.

       5.  By default stderr is used to log output messages and errors.
           This may be changed by calling selinux_set_callback(3) with
           the SELINUX_CB_LOG type option.

SEE ALSO         top

       selabel_get_digests_all_partial_matches(3),
       selinux_restorecon_set_sehandle(3),
       selinux_restorecon_default_handle(3),
       selinux_restorecon_get_skipped_errors(3),
       selinux_restorecon_set_exclude_list(3),
       selinux_restorecon_set_alt_rootpath(3),
       selinux_restorecon_xattr(3),
       selinux_set_callback(3)

COLOPHON         top

       This page is part of the selinux (Security-Enhanced Linux user-
       space libraries and tools) project.  Information about the
       project can be found at 
       ⟨https://github.com/SELinuxProject/selinux/wiki⟩.  If you have a
       bug report for this manual page, see
       ⟨https://github.com/SELinuxProject/selinux/wiki/Contributing⟩.
       This page was obtained from the project's upstream Git repository
       ⟨https://github.com/SELinuxProject/selinux⟩ on 2024-06-14.  (At
       that time, the date of the most recent commit that was found in
       the repository was 2023-05-11.)  If you discover any rendering
       problems in this HTML version of the page, or you believe there
       is a better or more up-to-date source for the page, or you have
       corrections or improvements to the information in this COLOPHON
       (which is not part of the original manual page), send a mail to
       man-pages@man7.org

Security Enhanced Linux        20 Oct 2015         selinux_restorecon(3)

Pages that refer to this page: selabel_get_digests_all_partial_matches(3)selinux_restorecon(3)selinux_restorecon_default_handle(3)selinux_restorecon_get_skipped_errors(3)selinux_restorecon_set_alt_rootpath(3)selinux_restorecon_set_exclude_list(3)selinux_restorecon_set_sehandle(3)selinux_restorecon_xattr(3)restorecon(8)setfiles(8)