gitprotocol-http(5) — Linux manual page

NAME | SYNOPSIS | DESCRIPTION | URL FORMAT | AUTHENTICATION | SSL | SESSION STATE | GENERAL REQUEST PROCESSING | DISCOVERING REFERENCES | SMART SERVICE GIT-UPLOAD-PACK | SMART SERVICE GIT-RECEIVE-PACK | REFERENCES | SEE ALSO | GIT | NOTES | COLOPHON

GITPROTOCOL-HTTP(5)            Git Manual            GITPROTOCOL-HTTP(5)

NAME         top

       gitprotocol-http - Git HTTP-based protocols

SYNOPSIS         top

       <over-the-wire-protocol>

DESCRIPTION         top

       Git supports two HTTP based transfer protocols. A "dumb" protocol
       which requires only a standard HTTP server on the server end of
       the connection, and a "smart" protocol which requires a Git aware
       CGI (or server module). This document describes both protocols.

       As a design feature smart clients can automatically upgrade
       "dumb" protocol URLs to smart URLs. This permits all users to
       have the same published URL, and the peers automatically select
       the most efficient transport available to them.

URL FORMAT         top

       URLs for Git repositories accessed by HTTP use the standard HTTP
       URL syntax documented by RFC 1738, so they are of the form:

           http://<host>:<port>/<path>?<searchpart>

       Within this documentation the placeholder $GIT_URL will stand for
       the http:// repository URL entered by the end-user.

       Servers SHOULD handle all requests to locations matching
       $GIT_URL, as both the "smart" and "dumb" HTTP protocols used by
       Git operate by appending additional path components onto the end
       of the user supplied $GIT_URL string.

       An example of a dumb client requesting a loose object:

           $GIT_URL:     http://example.com:8080/git/repo.git
           URL request:  http://example.com:8080/git/repo.git/objects/d0/49f6c27a2244e12041955e262a404c7faba355

       An example of a smart request to a catch-all gateway:

           $GIT_URL:     http://example.com/daemon.cgi?svc=git&q=
           URL request:  http://example.com/daemon.cgi?svc=git&q=/info/refs&service=git-receive-pack

       An example of a request to a submodule:

           $GIT_URL:     http://example.com/git/repo.git/path/submodule.git
           URL request:  http://example.com/git/repo.git/path/submodule.git/info/refs

       Clients MUST strip a trailing /, if present, from the user
       supplied $GIT_URL string to prevent empty path tokens (//) from
       appearing in any URL sent to a server. Compatible clients MUST
       expand $GIT_URL/info/refs as foo/info/refs and not
       foo//info/refs.

AUTHENTICATION         top

       Standard HTTP authentication is used if authentication is
       required to access a repository, and MAY be configured and
       enforced by the HTTP server software.

       Because Git repositories are accessed by standard path components
       server administrators MAY use directory based permissions within
       their HTTP server to control repository access.

       Clients SHOULD support Basic authentication as described by RFC
       2617. Servers SHOULD support Basic authentication by relying upon
       the HTTP server placed in front of the Git server software.

       Servers SHOULD NOT require HTTP cookies for the purposes of
       authentication or access control.

       Clients and servers MAY support other common forms of HTTP based
       authentication, such as Digest authentication.

SSL         top

       Clients and servers SHOULD support SSL, particularly to protect
       passwords when relying on Basic HTTP authentication.

SESSION STATE         top

       The Git over HTTP protocol (much like HTTP itself) is stateless
       from the perspective of the HTTP server side. All state MUST be
       retained and managed by the client process. This permits simple
       round-robin load-balancing on the server side, without needing to
       worry about state management.

       Clients MUST NOT require state management on the server side in
       order to function correctly.

       Servers MUST NOT require HTTP cookies in order to function
       correctly. Clients MAY store and forward HTTP cookies during
       request processing as described by RFC 2616 (HTTP/1.1). Servers
       SHOULD ignore any cookies sent by a client.

GENERAL REQUEST PROCESSING         top

       Except where noted, all standard HTTP behavior SHOULD be assumed
       by both client and server. This includes (but is not necessarily
       limited to):

       If there is no repository at $GIT_URL, or the resource pointed to
       by a location matching $GIT_URL does not exist, the server MUST
       NOT respond with 200 OK response. A server SHOULD respond with
       404 Not Found, 410 Gone, or any other suitable HTTP status code
       which does not imply the resource exists as requested.

       If there is a repository at $GIT_URL, but access is not currently
       permitted, the server MUST respond with the 403 Forbidden HTTP
       status code.

       Servers SHOULD support both HTTP 1.0 and HTTP 1.1. Servers SHOULD
       support chunked encoding for both request and response bodies.

       Clients SHOULD support both HTTP 1.0 and HTTP 1.1. Clients SHOULD
       support chunked encoding for both request and response bodies.

       Servers MAY return ETag and/or Last-Modified headers.

       Clients MAY revalidate cached entities by including
       If-Modified-Since and/or If-None-Match request headers.

       Servers MAY return 304 Not Modified if the relevant headers
       appear in the request and the entity has not changed. Clients
       MUST treat 304 Not Modified identical to 200 OK by reusing the
       cached entity.

       Clients MAY reuse a cached entity without revalidation if the
       Cache-Control and/or Expires header permits caching. Clients and
       servers MUST follow RFC 2616 for cache controls.

DISCOVERING REFERENCES         top

       All HTTP clients MUST begin either a fetch or a push exchange by
       discovering the references available on the remote repository.

   Dumb Clients
       HTTP clients that only support the "dumb" protocol MUST discover
       references by making a request for the special info/refs file of
       the repository.

       Dumb HTTP clients MUST make a GET request to $GIT_URL/info/refs,
       without any search/query parameters.

           C: GET $GIT_URL/info/refs HTTP/1.0

           S: 200 OK
           S:
           S: 95dcfa3633004da0049d3d0fa03f80589cbcaf31  refs/heads/maint
           S: d049f6c27a2244e12041955e262a404c7faba355  refs/heads/master
           S: 2cb58b79488a98d2721cea644875a8dd0026b115  refs/tags/v1.0
           S: a3c2e2402b99163d1d59756e5f207ae21cccba4c  refs/tags/v1.0^{}

       The Content-Type of the returned info/refs entity SHOULD be
       text/plain; charset=utf-8, but MAY be any content type. Clients
       MUST NOT attempt to validate the returned Content-Type. Dumb
       servers MUST NOT return a return type starting with
       application/x-git-.

       Cache-Control headers MAY be returned to disable caching of the
       returned entity.

       When examining the response clients SHOULD only examine the HTTP
       status code. Valid responses are 200 OK, or 304 Not Modified.

       The returned content is a UNIX formatted text file describing
       each ref and its known value. The file SHOULD be sorted by name
       according to the C locale ordering. The file SHOULD NOT include
       the default ref named HEAD.

           info_refs   =  *( ref_record )
           ref_record  =  any_ref / peeled_ref

           any_ref     =  obj-id HTAB refname LF
           peeled_ref  =  obj-id HTAB refname LF
                          obj-id HTAB refname "^{}" LF

   Smart Clients
       HTTP clients that support the "smart" protocol (or both the
       "smart" and "dumb" protocols) MUST discover references by making
       a parameterized request for the info/refs file of the repository.

       The request MUST contain exactly one query parameter,
       service=$servicename, where $servicename MUST be the service name
       the client wishes to contact to complete the operation. The
       request MUST NOT contain additional query parameters.

           C: GET $GIT_URL/info/refs?service=git-upload-pack HTTP/1.0

       dumb server reply:

           S: 200 OK
           S:
           S: 95dcfa3633004da0049d3d0fa03f80589cbcaf31  refs/heads/maint
           S: d049f6c27a2244e12041955e262a404c7faba355  refs/heads/master
           S: 2cb58b79488a98d2721cea644875a8dd0026b115  refs/tags/v1.0
           S: a3c2e2402b99163d1d59756e5f207ae21cccba4c  refs/tags/v1.0^{}

       smart server reply:

           S: 200 OK
           S: Content-Type: application/x-git-upload-pack-advertisement
           S: Cache-Control: no-cache
           S:
           S: 001e# service=git-upload-pack\n
           S: 0000
           S: 004895dcfa3633004da0049d3d0fa03f80589cbcaf31 refs/heads/maint\0multi_ack\n
           S: 003fd049f6c27a2244e12041955e262a404c7faba355 refs/heads/master\n
           S: 003c2cb58b79488a98d2721cea644875a8dd0026b115 refs/tags/v1.0\n
           S: 003fa3c2e2402b99163d1d59756e5f207ae21cccba4c refs/tags/v1.0^{}\n
           S: 0000

       The client may send Extra Parameters (see gitprotocol-pack(5)) as
       a colon-separated string in the Git-Protocol HTTP header.

       Uses the --http-backend-info-refs option to git-upload-pack(1).

       Dumb Server Response

           Dumb servers MUST respond with the dumb server reply format.

           See the prior section under dumb clients for a more detailed
           description of the dumb server response.

       Smart Server Response

           If the server does not recognize the requested service name,
           or the requested service name has been disabled by the server
           administrator, the server MUST respond with the 403 Forbidden
           HTTP status code.

           Otherwise, smart servers MUST respond with the smart server
           reply format for the requested service name.

           Cache-Control headers SHOULD be used to disable caching of
           the returned entity.

           The Content-Type MUST be
           application/x-$servicename-advertisement. Clients SHOULD fall
           back to the dumb protocol if another content type is
           returned. When falling back to the dumb protocol clients
           SHOULD NOT make an additional request to $GIT_URL/info/refs,
           but instead SHOULD use the response already in hand. Clients
           MUST NOT continue if they do not support the dumb protocol.

           Clients MUST validate the status code is either 200 OK or 304
           Not Modified.

           Clients MUST validate the first five bytes of the response
           entity matches the regex ^[0-9a-f]{4}#. If this test fails,
           clients MUST NOT continue.

           Clients MUST parse the entire response as a sequence of
           pkt-line records.

           Clients MUST verify the first pkt-line is #
           service=$servicename. Servers MUST set $servicename to be the
           request parameter value. Servers SHOULD include an LF at the
           end of this line. Clients MUST ignore an LF at the end of the
           line.

           Servers MUST terminate the response with the magic 0000 end
           pkt-line marker.

           The returned response is a pkt-line stream describing each
           ref and its known value. The stream SHOULD be sorted by name
           according to the C locale ordering. The stream SHOULD include
           the default ref named HEAD as the first ref. The stream MUST
           include capability declarations behind a NUL on the first
           ref.

           The returned response contains "version 1" if "version=1" was
           sent as an Extra Parameter.

               smart_reply     =  PKT-LINE("# service=$servicename" LF)
                                  "0000"
                                  *1("version 1")
                                  ref_list
                                  "0000"
               ref_list        =  empty_list / non_empty_list

               empty_list      =  PKT-LINE(zero-id SP "capabilities^{}" NUL cap-list LF)

               non_empty_list  =  PKT-LINE(obj-id SP name NUL cap_list LF)
                                  *ref_record

               cap-list        =  capability *(SP capability)
               capability      =  1*(LC_ALPHA / DIGIT / "-" / "_")
               LC_ALPHA        =  %x61-7A

               ref_record      =  any_ref / peeled_ref
               any_ref         =  PKT-LINE(obj-id SP name LF)
               peeled_ref      =  PKT-LINE(obj-id SP name LF)
                                  PKT-LINE(obj-id SP name "^{}" LF

SMART SERVICE GIT-UPLOAD-PACK         top

       This service reads from the repository pointed to by $GIT_URL.

       Clients MUST first perform ref discovery with
       $GIT_URL/info/refs?service=git-upload-pack.

           C: POST $GIT_URL/git-upload-pack HTTP/1.0
           C: Content-Type: application/x-git-upload-pack-request
           C:
           C: 0032want 0a53e9ddeaddad63ad106860237bbf53411d11a7\n
           C: 0032have 441b40d833fdfa93eb2908e52742248faf0ee993\n
           C: 0000

           S: 200 OK
           S: Content-Type: application/x-git-upload-pack-result
           S: Cache-Control: no-cache
           S:
           S: ....ACK %s, continue
           S: ....NAK

       Clients MUST NOT reuse or revalidate a cached response. Servers
       MUST include sufficient Cache-Control headers to prevent caching
       of the response.

       Servers SHOULD support all capabilities defined here.

       Clients MUST send at least one "want" command in the request
       body. Clients MUST NOT reference an id in a "want" command which
       did not appear in the response obtained through ref discovery
       unless the server advertises capability allow-tip-sha1-in-want or
       allow-reachable-sha1-in-want.

           compute_request   =  want_list
                                have_list
                                request_end
           request_end       =  "0000" / "done"

           want_list         =  PKT-LINE(want SP cap_list LF)
                                *(want_pkt)
           want_pkt          =  PKT-LINE(want LF)
           want              =  "want" SP id
           cap_list          =  capability *(SP capability)

           have_list         =  *PKT-LINE("have" SP id LF)

       TODO: Document this further.

   The Negotiation Algorithm
       The computation to select the minimal pack proceeds as follows (C
       = client, S = server):

       init step:

       C: Use ref discovery to obtain the advertised refs.

       C: Place any object seen into set advertised.

       C: Build an empty set, common, to hold the objects that are later
       determined to be on both ends.

       C: Build a set, want, of the objects from advertised that the
       client wants to fetch, based on what it saw during ref discovery.

       C: Start a queue, c_pending, ordered by commit time (popping
       newest first). Add all client refs. When a commit is popped from
       the queue its parents SHOULD be automatically inserted back.
       Commits MUST only enter the queue once.

       one compute step:

       C: Send one $GIT_URL/git-upload-pack request:

           C: 0032want <want-#1>...............................
           C: 0032want <want-#2>...............................
           ....
           C: 0032have <common-#1>.............................
           C: 0032have <common-#2>.............................
           ....
           C: 0032have <have-#1>...............................
           C: 0032have <have-#2>...............................
           ....
           C: 0000

       The stream is organized into "commands", with each command
       appearing by itself in a pkt-line. Within a command line, the
       text leading up to the first space is the command name, and the
       remainder of the line to the first LF is the value. Command lines
       are terminated with an LF as the last byte of the pkt-line value.

       Commands MUST appear in the following order, if they appear at
       all in the request stream:

       •   "want"

       •   "have"

       The stream is terminated by a pkt-line flush (0000).

       A single "want" or "have" command MUST have one hex formatted
       object name as its value. Multiple object names MUST be sent by
       sending multiple commands. Object names MUST be given using the
       object format negotiated through the object-format capability
       (default SHA-1).

       The have list is created by popping the first 32 commits from
       c_pending. Fewer can be supplied if c_pending empties.

       If the client has sent 256 "have" commits and has not yet
       received one of those back from s_common, or the client has
       emptied c_pending it SHOULD include a "done" command to let the
       server know it won’t proceed:

           C: 0009done

       S: Parse the git-upload-pack request:

       Verify all objects in want are directly reachable from refs.

       The server MAY walk backwards through history or through the
       reflog to permit slightly stale requests.

       If no "want" objects are received, send an error: TODO: Define
       error if no "want" lines are requested.

       If any "want" object is not reachable, send an error: TODO:
       Define error if an invalid "want" is requested.

       Create an empty list, s_common.

       If "have" was sent:

       Loop through the objects in the order supplied by the client.

       For each object, if the server has the object reachable from a
       ref, add it to s_common. If a commit is added to s_common, do not
       add any ancestors, even if they also appear in have.

       S: Send the git-upload-pack response:

       If the server has found a closed set of objects to pack or the
       request ends with "done", it replies with the pack. TODO:
       Document the pack based response

           S: PACK...

       The returned stream is the side-band-64k protocol supported by
       the git-upload-pack service, and the pack is embedded into stream
       1. Progress messages from the server side MAY appear in stream 2.

       Here a "closed set of objects" is defined to have at least one
       path from every "want" to at least one "common" object.

       If the server needs more information, it replies with a status
       continue response: TODO: Document the non-pack response

       C: Parse the upload-pack response: TODO: Document parsing
       response

       Do another compute step.

SMART SERVICE GIT-RECEIVE-PACK         top

       This service reads from the repository pointed to by $GIT_URL.

       Clients MUST first perform ref discovery with
       $GIT_URL/info/refs?service=git-receive-pack.

           C: POST $GIT_URL/git-receive-pack HTTP/1.0
           C: Content-Type: application/x-git-receive-pack-request
           C:
           C: ....0a53e9ddeaddad63ad106860237bbf53411d11a7 441b40d833fdfa93eb2908e52742248faf0ee993 refs/heads/maint\0 report-status
           C: 0000
           C: PACK....

           S: 200 OK
           S: Content-Type: application/x-git-receive-pack-result
           S: Cache-Control: no-cache
           S:
           S: ....

       Clients MUST NOT reuse or revalidate a cached response. Servers
       MUST include sufficient Cache-Control headers to prevent caching
       of the response.

       Servers SHOULD support all capabilities defined here.

       Clients MUST send at least one command in the request body.
       Within the command portion of the request body clients SHOULD
       send the id obtained through ref discovery as old_id.

           update_request  =  command_list
                              "PACK" <binary-data>

           command_list    =  PKT-LINE(command NUL cap_list LF)
                              *(command_pkt)
           command_pkt     =  PKT-LINE(command LF)
           cap_list        =  *(SP capability) SP

           command         =  create / delete / update
           create          =  zero-id SP new_id SP name
           delete          =  old_id SP zero-id SP name
           update          =  old_id SP new_id SP name

       TODO: Document this further.

REFERENCES         top

       RFC 1738: Uniform Resource Locators (URL)[1] RFC 2616: Hypertext
       Transfer Protocol — HTTP/1.1[2]

SEE ALSO         top

       gitprotocol-pack(5) gitprotocol-capabilities(5)

GIT         top

       Part of the git(1) suite

NOTES         top

        1. RFC 1738: Uniform Resource Locators (URL)
           https://www.ietf.org/rfc/rfc1738.txt

        2. RFC 2616: Hypertext Transfer Protocol — HTTP/1.1
           https://www.ietf.org/rfc/rfc2616.txt

COLOPHON         top

       This page is part of the git (Git distributed version control
       system) project.  Information about the project can be found at
       ⟨http://git-scm.com/⟩.  If you have a bug report for this manual
       page, see ⟨http://git-scm.com/community⟩.  This page was obtained
       from the project's upstream Git repository
       ⟨https://github.com/git/git.git⟩ on 2024-06-14.  (At that time,
       the date of the most recent commit that was found in the
       repository was 2024-06-12.)  If you discover any rendering
       problems in this HTML version of the page, or you believe there
       is a better or more up-to-date source for the page, or you have
       corrections or improvements to the information in this COLOPHON
       (which is not part of the original manual page), send a mail to
       man-pages@man7.org

Git 2.45.2.492.gd63586         2024-06-12            GITPROTOCOL-HTTP(5)

Pages that refer to this page: git(1)git-upload-pack(1)gitprotocol-pack(5)gitprotocol-v2(5)