|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SYNOPSIS | DESCRIPTION | CONFIGURATION DIRECTORIES AND PRECEDENCE | OPTIONS | SEE ALSO | NOTES | COLOPHON |
|
|
|
HOMED.CONF(5) homed.conf HOMED.CONF(5)
homed.conf, homed.conf.d - Home area/user account manager
configuration files
/etc/systemd/homed.conf
/run/systemd/homed.conf
/usr/local/lib/systemd/homed.conf
/usr/lib/systemd/homed.conf
/etc/systemd/homed.conf.d/*.conf
/run/systemd/homed.conf.d/*.conf
/usr/local/lib/systemd/homed.conf.d/*.conf
/usr/lib/systemd/homed.conf.d/*.conf
These configuration files control default parameters for home
areas/user accounts created and managed by
systemd-homed.service(8).
The default configuration is set during compilation, so
configuration is only needed when it is necessary to deviate from
those defaults. The main configuration file is loaded from one of
the listed directories in order of priority, only the first file
found is used: /etc/systemd/, /run/systemd/,
/usr/local/lib/systemd/ [1], /usr/lib/systemd/. The vendor
version of the file contains commented out entries showing the
defaults as a guide to the administrator. Local overrides can
also be created by creating drop-ins, as described below. The
main configuration file can also be edited for this purpose (or a
copy in /etc/ if it's shipped under /usr/), however using
drop-ins for local configuration is recommended over
modifications to the main configuration file.
In addition to the main configuration file, drop-in configuration
snippets are read from /usr/lib/systemd/*.conf.d/,
/usr/local/lib/systemd/*.conf.d/, and /etc/systemd/*.conf.d/.
Those drop-ins have higher precedence and override the main
configuration file. Files in the *.conf.d/ configuration
subdirectories are sorted by their filename in lexicographic
order, regardless of in which of the subdirectories they reside.
When multiple files specify the same option, for options which
accept just a single value, the entry in the file sorted last
takes precedence, and for options which accept a list of values,
entries are collected as they occur in the sorted files.
When packages need to customize the configuration, they can
install drop-ins under /usr/. Files in /etc/ are reserved for the
local administrator, who may use this logic to override the
configuration files installed by vendor packages. Drop-ins have
to be used to override package drop-ins, since the main
configuration file has lower precedence. It is recommended to
prefix all filenames in those subdirectories with a two-digit
number and a dash, to simplify the ordering. This also defines a
concept of drop-in priorities to allow OS vendors to ship
drop-ins within a specific range lower than the range used by
users. This should lower the risk of package drop-ins overriding
accidentally drop-ins defined by users. It is recommended to use
the range 10-40 for drop-ins in /usr/ and the range 60-90 for
drop-ins in /etc/ and /run/, to make sure that local and
transient drop-ins take priority over drop-ins shipped by the OS
vendor.
To disable a configuration file supplied by the vendor, the
recommended way is to place a symlink to /dev/null in the
configuration directory in /etc/, with the same filename as the
vendor configuration file.
The following options are available in the [Home] section:
DefaultStorage=
The default storage to use for home areas. Takes one of
"luks", "fscrypt", "directory", "subvolume", "cifs". For
details about these options, see homectl(1). If not
configured or assigned the empty string, the default storage
is automatically determined: if not running in a container
environment and /home/ is not itself encrypted, defaults to
"luks". Otherwise defaults to "subvolume" if /home/ is on a
btrfs file system, and "directory" otherwise. Note that the
storage selected on the homectl command line always takes
precedence.
Added in version 246.
DefaultFileSystemType=
When using "luks" as storage (see above), selects the default
file system to use inside the user's LUKS volume. Takes one
of "btrfs", "ext4" or "xfs". If not specified defaults to
"btrfs". This setting has no effect if a different storage
mechanism is used. The file system type selected on the
homectl command line always takes precedence.
Added in version 246.
systemd(1), systemd-homed.service(8)
1. 💣💥🧨💥💥💣 Please note that those configuration files must
be available at all times. If /usr/local/ is a separate
partition, it may not be available during early boot, and
must not be used for configuration.
This page is part of the systemd (systemd system and service
manager) project. Information about the project can be found at
⟨http://www.freedesktop.org/wiki/Software/systemd⟩. If you have
a bug report for this manual page, see
⟨http://www.freedesktop.org/wiki/Software/systemd/#bugreports⟩.
This page was obtained from the project's upstream Git repository
⟨https://github.com/systemd/systemd.git⟩ on 2024-06-14. (At that
time, the date of the most recent commit that was found in the
repository was 2024-06-13.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
systemd 257~devel HOMED.CONF(5)
Pages that refer to this page: homectl(1), systemd.directives(7), systemd.index(7), pam_systemd_home(8), systemd-homed.service(8)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|