libpfm_intel_skx_unc_irp(3) — Linux manual page

NAME \| SYNOPSIS \| DESCRIPTION \| MODIFIERS \| AUTHORS \| COLOPHON

LIBPFM(3)               Linux Programmer's Manual               LIBPFM(3)

NAME top

       libpfm_intel_skx_unc_irp - support for Intel Broadwell Server IRP
       uncore PMU

SYNOPSIS top

       #include <perfmon/pfmlib.h>

       PMU name: skx_unc_irp
       PMU desc: Intel Skylake X Server IRP uncore PMU

DESCRIPTION top

       The library supports the Intel Skylake X Server IRP (IIO
       coherency) uncore PMU .

MODIFIERS top

       The following modifiers are supported on Intel Skylake X server
       IRP uncore PMU:

       e      Enable edge detection, i.e., count only when there is a
              state transition from no occurrence of the event to at
              least one occurrence. This modifier must be combined with a
              threshold modifier (t) with a value greater or equal to
              one.  This is a boolean modifier.

       t      Set the threshold value. When set to a non-zero value, the
              counter counts the number of cycles in which the number of
              occurrences of the event is greater or equal to the
              threshold.  This is an integer modifier with values in the
              range [0:255].

       i      Invert the meaning of the threshold or edge filter. If set,
              the event counts when strictly less than N occurrences
              occur per cycle if threshold is set to N. When invert is
              set, then threshold must be set to non-zero value. If set,
              the event counts when the event transitions from occurring
              to not occurring (falling edge) when edge detection is set.
              This is a boolean modifier

AUTHORS top

       Stephane Eranian <eranian@gmail.com>

COLOPHON top

       This page is part of the perfmon2 (a performance monitoring
       library) project.  Information about the project can be found at
       ⟨http://perfmon2.sourceforge.net/⟩.  If you have a bug report for
       this manual page, send it to perfmon2-devel@lists.sourceforge.net.
       This page was obtained from the project's upstream Git repository
       ⟨git://git.code.sf.net/p/perfmon2/libpfm4 perfmon2-libpfm4⟩ on
       2025-02-02.  (At that time, the date of the most recent commit
       that was found in the repository was 2025-01-27.)  If you discover
       any rendering problems in this HTML version of the page, or you
       believe there is a better or more up-to-date source for the page,
       or you have corrections or improvements to the information in this
       COLOPHON (which is not part of the original manual page), send a
       mail to man-pages@man7.org

                              January, 2018                     LIBPFM(3)