|
HTML rendering created 2025-09-06 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SYNOPSIS | DESCRIPTION | TESTS | OUTPUT | OPTIONS | RUNNING TESTS | WRITING TESTS | SEE ALSO | COLOPHON |
|
|
|
runtests.pl(1) General Commands Manual runtests.pl(1)
runtests.pl - run one or more test cases
runtests.pl [options] [tests]
runtests.pl runs one, several or all the existing test cases in
curl's test suite. It is often called from the root Makefile of
the curl package with 'make test'.
Specify which test(s) to run by specifying test numbers or
keywords.
If no test number or keyword is given, all existing tests that the
script can find are considered for running. You can specify single
test cases to run by specifying test numbers space-separated, like
1 3 5 7 11, and you can specify a range of tests like 45 to 67.
Specify tests to not run with a leading exclamation point, like
!66, which runs all available tests except number 66.
Prefix a test number with a tilde (~) to still run it, but ignore
the results.
It is also possible to specify tests based on a keyword describing
the test(s) to run, like FTPS. The keywords are strings used in
the individual tests.
Features are included as keywords with the feat: prefix (e.g.,
feat:debug). Specify a feature to run only tests requiring it, or
exclude tests using !feat:<feature>, like !feat:proxy, to disable
tests which depend on that feature.
You can also specify keywords with a leading exclamation point and
the keyword or phrase, like "!HTTP NTLM auth" to run all tests
except those using this keyword. Remember that the exclamation
marks and spaces need to be quoted somehow when entered at many
command shells.
Prefix a keyword with a tilde (~) to still run it, but ignore the
results.
When running without -s (short output), for instance when running
runtests.pl directly rather than via make, each test emits a pair
of lines like this:
Test 0045...[simple HTTP Location: without protocol in initial URL]
--pd---e-v- OK (45 out of 1427, remaining: 16:08, took 6.188s, duration: 00:31)
the first line contains the test number and a description. On the
second line, the characters at the beginning are flags indicating
which aspects of curl's behavior were checked by the test:
s stdout
r stderr
p protocol
d data
u upload
P proxy
o output
e exit code
m memory
v valgrind
E the test was run event-based
The remainder of the second line contains the test result, current
test sequence, total number of tests to be run and an estimated
amount of time to complete the test run.
-a Continue running the rest of the test cases even if one
test fails. By default, the test script stops as soon as an
error is detected.
-ac <curl>
Provide a path to a curl binary to talk to APIs (currently
only CI test APIs).
-am Display test results in automake style output (PASS/FAIL:
[number] [name]).
-c <curl>
Provide a path to a custom curl binary to run the tests
with. Default is the curl executable in the build tree.
--ci Show extra information useful in for CI runs.
-d Enable protocol debug: have the servers display protocol
output. If used in conjunction with parallel testing, it is
difficult to associate the logs with the specific test
being run.
-E <exclude_file>
Load the exclude_file with additional reasons why certain
tests should be skipped. Useful when testing with external
HTTP proxies in which case some of the tests are not
appropriate.
The file contains colon-delimited lines. The first field
contains the type of exclusion, the second field contains a
pattern and the final field contains the reason why
matching tests should be skipped. The exclusion types are
keyword, test, and tool.
-e` or `--test-event
Run the test event-based (if possible). This makes runtests
invoke curl with --test-event option. This option only
works if both curl and libcurl were built debug-enabled.
-f Force the test to run even if mentioned in DISABLED.
-g Run the given test(s) with gdb. This is best used on a
single test case and curl built --disable-shared. This then
fires up gdb with command line set to run the specified
test case. Simply (set a break-point and) type 'run' to
start.
-gl Run the given test(s) with lldb. This is best used on a
single test case and curl built --disable-shared. This then
fires up lldb with command line set to run the specified
test case. Simply (set a break-point and) type 'run' to
start.
-gw Run the given test(s) with gdb as a windowed application.
-h, --help
Displays a help text about this program's command line
options.
-j[num]
Spawn the given number of processes to run tests in. This
defaults to 0 to run tests serially within a single
process. Using a number greater than one allows multiple
tests to run in parallel, speeding up a test run. The
optimum number is dependent on the system and set of tests
to run, but 7 times the number of CPU cores is a good
figure to start with, or 1.3 times if Valgrind is in use,
or 5 times for torture tests. Enabling parallel tests is
not recommended in conjunction with the -g option.
-k Keep output and log files in log/ after a test run, even if
no error was detected. Useful for debugging.
-L <file>
Load and execute the specified file which should contain
perl code. This option allows one to change runtests.pl
behavior by overwriting functions and variables and is
useful when testing external proxies using curl's
regression test suite.
-l Lists all test case names.
-n Disable the check for and use of valgrind.
--no-debuginfod
Delete the DEBUGINFOD_URLS variable if that is defined.
Makes valgrind, gdb etc not able to use this functionality.
-o <variablename=value>
Overwrite the specified internal variable with value.
Useful to change variables that did not get a dedicated
flag to change them. Check the source to see which
variables are available.
-P <proxy>
Use the specified HTTP proxy when executing tests, even if
the tests themselves do not specify a proxy. This option
allows one to test external proxies using curl's regression
test suite.
-p Prints out all files in the log directory to stdout when a
test case fails. Practical when used in the automated and
distributed tests since then the people checking the
failures and the reasons for them might not have physical
access to the machine and logs.
-R Run the tests in a scrambled, or randomized, order instead
of sequentially.
The random seed initially set for this is fixed per month
and can be set with --seed.
-r Display run time statistics. (Requires the Perl Time::HiRes
module)
-rf Display full run time statistics. (Requires the Perl
Time::HiRes module)
--repeat=[num]
This repeats the given set of test numbers this many times.
If no test numbers are given, it repeats ALL tests this
many times. It adds the new repeated sequence at the end of
the initially given one.
If -R option is also used, the scrambling is done after the
repeats have extended the test sequence.
--retry=[num]
Number of attempts for the whole test run to retry failed
tests.
-s Shorter output. Speaks less than default.
--seed=[num]
When using --shallow or -R that randomize certain aspects
of the behavior, this option can set the initial seed. If
not set, the random seed is set based on the currently set
local year and month and the first line of the "curl -V"
output.
--shallow=[num]
Used together with -t. This limits the number of tests to
fail in torture mode to no more than num per test case. If
this reduces the amount, the script randomly discards
entries to fail until the amount is num.
The random seed initially set for this is fixed per month
and can be set with --seed.
-t[num]
Selects a torture test for the given tests. This makes
runtests.pl first run the tests once and count the number
of memory allocations made. It then reruns the test that
number of times, each time forcing one of the allocations
to fail until all allocations have been tested. By setting
num you can force the allocation with that number to be set
to fail at once instead of looping through everyone, which
is handy when debugging and then often in combination with
-g.
--test-duphandle
Passes the --test-duphandle option to curl when invoked.
This command line option only exists in debug builds and
runs curl normally, but duplicates the easy handle before
the transfer and use the duplicate instead of the original
handle. This verifies that the duplicate works exactly as
good as the original handle.
Because of how the curl tool uses a share object to store
and keep some data, not everything is however perfectly
copied in the duplicate. In particular HSTS data is not. A
specific test case can be set to avoid using
--test-duphandle by disabling it on a per test basis.
-u Error instead of warning on server unexpectedly alive.
-v Enable verbose output. Speaks more than by default. If used
in conjunction with parallel testing, it is difficult to
associate the logs with the specific test being run.
-vc <curl>
Provide a path to a custom curl binary to run when
verifying that the servers running are indeed our test
servers. Default is the curl executable in the build tree.
Many tests have conditions that must be met before the test case
can run fine. They could depend on built-in features in libcurl
or features present in the operating system or even in third-party
libraries that curl may or may not use.
The test script checks most of these by itself to determine when
it is safe to attempt to run each test. Those which cannot be run
due to failed requirements are simply skipped and listed at the
completion of all test cases. In some unusual configurations, the
test script cannot make the correct determination for all tests.
In these cases, the problematic tests can be skipped using the
"!keyword" skip feature documented earlier.
The simplest way to write test cases is to start with a similar
existing test, save it with a new number and then adjust it to
fit. There is an attempt to document the test case file format in
tests/FILEFORMAT.md.
runtests.pl
This page is part of the curl (Command line tool and library for
transferring data with URLs) project. Information about the
project can be found at ⟨https://curl.haxx.se/⟩. If you have a
bug report for this manual page, see
⟨https://curl.haxx.se/docs/bugs.html⟩. This page was obtained
from the project's upstream Git repository
⟨https://github.com/curl/curl.git⟩ on 2025-08-11. (At that time,
the date of the most recent commit that was found in the
repository was 2025-08-10.) If you discover any rendering
problems in this HTML version of the page, or you believe there is
a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
runtests 2025-08-09 runtests.pl(1)
|
HTML rendering created 2025-09-06 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|