|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | LIBRARY | SYNOPSIS | DESCRIPTION | RETURN VALUE | ERRORS | STANDARDS | HISTORY | NOTES | EXAMPLES | SEE ALSO | COLOPHON |
|
|
|
process_vm_readv(2) System Calls Manual process_vm_readv(2)
process_vm_readv, process_vm_writev - transfer data between
process address spaces
Standard C library (libc, -lc)
#include <sys/uio.h>
ssize_t process_vm_readv(pid_t pid,
const struct iovec *local_iov,
unsigned long liovcnt,
const struct iovec *remote_iov,
unsigned long riovcnt,
unsigned long flags);
ssize_t process_vm_writev(pid_t pid,
const struct iovec *local_iov,
unsigned long liovcnt,
const struct iovec *remote_iov,
unsigned long riovcnt,
unsigned long flags);
Feature Test Macro Requirements for glibc (see
feature_test_macros(7)):
process_vm_readv(), process_vm_writev():
_GNU_SOURCE
These system calls transfer data between the address space of the
calling process ("the local process") and the process identified
by pid ("the remote process"). The data moves directly between
the address spaces of the two processes, without passing through
kernel space.
The process_vm_readv() system call transfers data from the remote
process to the local process. The data to be transferred is
identified by remote_iov and riovcnt: remote_iov is a pointer to
an array describing address ranges in the process pid, and
riovcnt specifies the number of elements in remote_iov. The data
is transferred to the locations specified by local_iov and
liovcnt: local_iov is a pointer to an array describing address
ranges in the calling process, and liovcnt specifies the number
of elements in local_iov.
The process_vm_writev() system call is the converse of
process_vm_readv()—it transfers data from the local process to
the remote process. Other than the direction of the transfer,
the arguments liovcnt, local_iov, riovcnt, and remote_iov have
the same meaning as for process_vm_readv().
The local_iov and remote_iov arguments point to an array of iovec
structures, described in iovec(3type).
Buffers are processed in array order. This means that
process_vm_readv() completely fills local_iov[0] before
proceeding to local_iov[1], and so on. Likewise, remote_iov[0]
is completely read before proceeding to remote_iov[1], and so on.
Similarly, process_vm_writev() writes out the entire contents of
local_iov[0] before proceeding to local_iov[1], and it completely
fills remote_iov[0] before proceeding to remote_iov[1].
The lengths of remote_iov[i].iov_len and local_iov[i].iov_len do
not have to be the same. Thus, it is possible to split a single
local buffer into multiple remote buffers, or vice versa.
The flags argument is currently unused and must be set to 0.
The values specified in the liovcnt and riovcnt arguments must be
less than or equal to IOV_MAX (defined in <limits.h> or
accessible via the call sysconf(_SC_IOV_MAX)).
The count arguments and local_iov are checked before doing any
transfers. If the counts are too big, or local_iov is invalid,
or the addresses refer to regions that are inaccessible to the
local process, none of the vectors will be processed and an error
will be returned immediately.
Note, however, that these system calls do not check the memory
regions in the remote process until just before doing the
read/write. Consequently, a partial read/write (see RETURN
VALUE) may result if one of the remote_iov elements points to an
invalid memory region in the remote process. No further
reads/writes will be attempted beyond that point. Keep this in
mind when attempting to read data of unknown length (such as C
strings that are null-terminated) from a remote process, by
avoiding spanning memory pages (typically 4 KiB) in a single
remote iovec element. (Instead, split the remote read into two
remote_iov elements and have them merge back into a single write
local_iov entry. The first read entry goes up to the page
boundary, while the second starts on the next page boundary.)
Permission to read from or write to another process is governed
by a ptrace access mode PTRACE_MODE_ATTACH_REALCREDS check; see
ptrace(2).
On success, process_vm_readv() returns the number of bytes read
and process_vm_writev() returns the number of bytes written.
This return value may be less than the total number of requested
bytes, if a partial read/write occurred. (Partial transfers
apply at the granularity of iovec elements. These system calls
won't perform a partial transfer that splits a single iovec
element.) The caller should check the return value to determine
whether a partial read/write occurred.
On error, -1 is returned and errno is set to indicate the error.
EFAULT The memory described by local_iov is outside the caller's
accessible address space.
EFAULT The memory described by remote_iov is outside the
accessible address space of the process pid.
EINVAL The sum of the iov_len values of either local_iov or
remote_iov overflows a ssize_t value.
EINVAL flags is not 0.
EINVAL liovcnt or riovcnt is too large.
ENOMEM Could not allocate memory for internal copies of the iovec
structures.
EPERM The caller does not have permission to access the address
space of the process pid.
ESRCH No process with ID pid exists.
Linux.
Linux 3.2, glibc 2.15.
The data transfers performed by process_vm_readv() and
process_vm_writev() are not guaranteed to be atomic in any way.
These system calls were designed to permit fast message passing
by allowing messages to be exchanged with a single copy operation
(rather than the double copy that would be required when using,
for example, shared memory or pipes).
The following code sample demonstrates the use of
process_vm_readv(). It reads 20 bytes at the address 0x10000
from the process with PID 10 and writes the first 10 bytes into
buf1 and the second 10 bytes into buf2.
#define _GNU_SOURCE
#include <stdlib.h>
#include <sys/types.h>
#include <sys/uio.h>
int
main(void)
{
char buf1[10];
char buf2[10];
pid_t pid = 10; /* PID of remote process */
ssize_t nread;
struct iovec local[2];
struct iovec remote[1];
local[0].iov_base = buf1;
local[0].iov_len = 10;
local[1].iov_base = buf2;
local[1].iov_len = 10;
remote[0].iov_base = (void *) 0x10000;
remote[0].iov_len = 20;
nread = process_vm_readv(pid, local, 2, remote, 1, 0);
if (nread != 20)
exit(EXIT_FAILURE);
exit(EXIT_SUCCESS);
}
readv(2), writev(2)
This page is part of the man-pages (Linux kernel and C library
user-space interface documentation) project. Information about
the project can be found at
⟨https://www.kernel.org/doc/man-pages/⟩. If you have a bug report
for this manual page, see
⟨https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/tree/CONTRIBUTING⟩.
This page was obtained from the tarball man-pages-6.9.1.tar.gz
fetched from
⟨https://mirrors.edge.kernel.org/pub/linux/docs/man-pages/⟩ on
2024-06-26. If you discover any rendering problems in this HTML
version of the page, or you believe there is a better or more up-
to-date source for the page, or you have corrections or
improvements to the information in this COLOPHON (which is not
part of the original manual page), send a mail to
man-pages@man7.org
Linux man-pages 6.9.1 2024-05-02 process_vm_readv(2)
Pages that refer to this page: process_madvise(2), ptrace(2), syscalls(2), capabilities(7)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|